| INCUDES: |
– AirCurve 10 S device with integrated humidifier (37213)
– New humidifier water chamber tub
– Slender, lightweight tubing (SlimLine)
– Power supply
– Travel carry bag
– 2 Additional Standard Tubes
– 6 Additional Filters
– 1 CPAP Bedside Organizer
– 1 CPAP Mask of YOUR CHOICE
– ClimateLineAir – Heated Tube (Optional)
The AirCurve™ 10 S BiLevel Machine with HumidAir™ Heated Humidifier operates on a set, higher pressure for inspiration and a set, lower pressure for expiration. The machine’s comfort features are designed to help the user adjust to the two delivered pressures. This is a bilevel machine delivering one pressure for inhalation and one for exhalation while monitoring the length of the breaths and responding to alter the timing as needed to maintain the respiratory cycle.
Features
– Easy-Breathe Comfort Feature
– Built-In HumidAir™ Heated Humidifier
– TiControl and Adjustable Rise Time
– LCD Displays with My Options
– Enhanced Vsync Technology
– SmartStart / SmartStop
– SD Card Slot and Data Storage
*SD Card Not Included
Easy-Breathe Comfort Feature
The Easy-Breathe feature on the AirCurve™ 10 S is designed to imitate a more natural breathing pattern. At the point of transition between the two pressures, a waveform of increasing and decreasing pressure is released to encourage a natural resting breath.
Built-In HumidAir™ Heated Humidifier
The AirCurve™ 10 S has a fully integrated humidifier built-in to the machine to supply moisture and a warmer temperature throughout the hose to increase therapy comfort. Using the My Options screen on the machine, the humidification level is easy to set. Numbers 1 through 8 are listed on the screen, 1 represents the lowest level of humidification, and 8 represents the highest. The humidifier is not required for therapy, so it may be turned off if it is not desired.
The addition of the OPTIONAL ClimateLineAir™ heated tube assists in maintaining the warm temperature throughout the hose to prevent Rainout as the environmental temperature changes.
TiControl and Adjustable Rise Time
The TiControl feature on the AirCurve S machine monitors the pattern of inhalation and exhalation, comparing it against the TiMax and TiMin settings on the machine. Those with respiratory disorders such as COPD or obstructive lung disease may experience early or delayed changes from inspiration to expiration, referred to as cycling. The 10 S BiLevel TiControl feature is designed to prevent cycling by setting a minimum and maximum time limit on inspiration. When the machine detects the user breathing which falls outside the machine settings, it will intervene to alter the timing of the delivered IPAP (inhalation) or EPAP (exhalation) pressure.
TiControl Settings:
– Ti Max: Maximum length of Inhalation
– Ti Min: Minimum length of Inhalation
– Trigger: Sensitivity level for inhalation trigger
– Cycle: Sensitivity level for exhalation
Adjustable rise time is similar to TiControl. Both features support the user’s ability to breathe at the appropriate time. Rise time is designed for this bilevel machine to increase the range of time from expiration to inspiration based on the set time requirement. Please Note: The rise time should not exceed the time set for inspiration due to a required higher pressure at inhalation.
IMPORTANT FUNCTION NOTE: The AirCurve 10 S machine does spontaneously regulate the breathing pattern to avoid cycling which results in inefficient breathing. This machine DOES NOT deliver a breath on a timed basis. This machine is NOT a BiLevel ST machine and DOES NOT have a back up rate setting.
LCD Display with My Options
The AirCurve™ 10 S BiLevel has a color LCD display. The menus are designed to be easy to read and use. Select the menu item on the screen by turning the easy grip dial. Select the My Options menu to view and modify the current settings:
– Ramp time – Ease into therapy with a period of lower pressure, or select AutoRamp™ allowing the machine to sense and adjust when sleep begins.
– Humidity Level – Set humidity between 1 (lowest) & 8 (highest), or turn it off.
– Mask Fit – Runs a seal integrity check showing a green smiling face for a good fit or red frowning face for a poor fit.
– Leak Alert- Set the device to begin beeping when a large leak is detected or the mask is removed.
– SmartStart™ – Therapy automatically starts when it senses breathing.
– SmartStop™ – Therapy automatically stops when the mask is removed.
– Mask Type – Set the mask type being used: Nasal; Nasal Pillow; Full Face Mask.
– Run Warmup – Preheat the humidifier water before starting therapy.
Enhanced Vsync Technology
If changes occur in mask pressure or the seal of the mask, Vsync technology is established to quickly detect the leak. Vsync leak management is developed by ResMed to track and control leakage and to relay accurate data in the instance that a leak arises. The goal is to provide the user with a factual estimation of airflow. Likewise, the differences in lung capacity can be determined by the Trigger and Cycle Sensitivity feature. The level selected reflects the respiratory effort of the user.
SmartStart™ / SmartStop™
The intuitive AirCurve™ 10 S SmartStart™ component automatically starts the device when the user breathes into the mask. The SmartStop™ component stops the device when the user removes the mask.
SD Card and Data Storage
The AirCurve™ 10 S BiLevel records the information about the sleep therapy, which can be downloaded onto an SD Card. The machine’s on board memory holds compliance information for 365 sessions of use as well as detailed data for 30 sessions.
Recommended Replacement Schedule
| Full Face Mask | 1 every 3 months | The mask is the plastic portion of the interface. That part should be replaced every 3 months. The cushion part is different. The cushion inserts have to be replaced more often because of the contact with the face. They can be separated from the frame work and should be replaced once a month. |
| Nasal or Pillow Mask | 1 every 3 months | The mask is the plastic portion of the interface. That part should be replaced every 3 months. The cushion part is different. The cushion inserts or pillows have to be replaced more often because they touch the face. They can be separated from the frame work and should be replaced once a month. |
| Headgear | 1 every 6 months | CPAP mask headgear and chin straps may become stretched and lose their elasticity, leading to over-tightening and discomfort. They can also trap bacteria from sweat and moisture. |
| Tubing | 1 every 3 months | CPAP mask tubing may develop small holes or tears, which can cause air leaks. If your tube is leaking, you may not be receiving your prescribed therapy setting from your CPAP. This can cause you to feel like you’re not sleeping as well. |
| Chinstrap | 1 every 6 months | Chinstraps may become stretched and lose their elasticity, leading to over-tightening and discomfort. They can also trap bacteria from sweat and moisture. |
| Full Face Mask Cushion | 1 every month | Full face mask cushions cover more of your face and may deteriorate over time through regular wear and tear and cause leaks throughout treatment. Regular replacement is recommended for hygienic purposes and to ensure the best fit and most effective treatment. |
| Nasal Mask Cushion | 2 every month | Nasal mask cushions are in constant contact with your face and should be replaced consistently. Regular replacement is recommended for hygienic purposes and to ensure the best fit and most effective treatment. |
| Pillow Mask Pillows | 2 every month | Pillow masks are in constant contact with your face and the pillows sit inside your nose throughout the night. Regular replacement is recommended for hygienic purposes and to ensure the best fit and most effective treatment. |
| Heated Tubing | 1 every 3 months | CPAP mask tubing may develop small holes or tears, which can cause air leaks. If your tube is leaking, you may not be receiving your prescribed therapy setting from your CPAP. This can cause you to feel like you’re not sleeping as well. |
| Disposable Filters | 2 every month | CPAP device filters can wear out or become clogged over time, potentially exposing you to airborne particles, mold and bacteria. |
| Non-disposable Filters | 1 every 6 months | CPAP device filters can wear out or become clogged over time, potentially exposing you to airborne particles, mold and bacteria. |
| Humidifier Water Chamber | 1 every 6 months | CPAP humidifier water chambers may become discolored, cracked, cloudy or even pitted due to the mineral levels found in most tap and drinking water. As the material deteriorates, cracks may trap bacteria from moisture. |
| Mask Frame System | 1 every 3 months | The frame system is comprised of the mask frame and cushion. Due to being in close proximity to the face during treatment, frames should be regularly replaced. However, since not in direct contact, the frame system is only eligible for replacement every three months. |
| CPAP/BiPAP Machine | 1 every 5 years | A CPAP machine’s life span is typically 5 years. We recommend getting a backup CPAP machine, especially if your current machine is more than two years old. That way you’ll never be without your therapy, even if one of your devices requires maintenance. |
| Add your CPAP Mask - Save 10% | AirFit F10 Full Face Mask – Small, AirFit F10 Full Face Mask – Medium, AirFit F10 Full Face Mask – Large, AirFit F10 for Her Full Face Mask – Small, AirFit F10 for Her Full Face Mask – Medium, AirFit F20 Full Face Mask – Small, AirFit F20 Full Face Mask – Medium, AirFit F20 Full Face Mask – Large, AirFit F20 for Her Full Face Mask – Small, AirFit F20 for Her Full Face Mask – Medium, AirFit F30 Full Face Mask with Headgear – Small, AirFit F30 Full Face Mask with Headgear – Medium, AirFit P10 Nasal Pillows System with Headgear, Amara Full Face (Silicone) – Petite, Amara Full Face (Silicone) – Small, Amara Full Face (Silicone) – Medium, Amara Full Face (Silicone) – Large, Amara Full Face (Gel) – Petite, Amara Full Face (Gel) – Small, Amara Full Face (Gel) – Medium, Amara Full Face (Gel) – Large, Amara View Full Face – Small, Amara View Full Face – Medium, Amara View Full Face – Large, DreamWear Under the Nose Nasal Mask (All sizes included), DreamWear Pillows System (All sizes included), DreamWear Full Face Mask Fitpack (All sizes included), N20 Nasal Mask – Small, N20 Nasal Mask – Medium, N20 Nasal Mask – Large, N20 for Her Nasal Mask – One Size, Nuance Pillows System (All sizes included), Nuance Pro Gel Pillows System (All sizes included), Mirage Activa LT with Headgear-Large, Wisp Nasal Mask (Clear Frame) – (All sizes included), Wisp Nasal Mask (Fabric Frame) – (All sizes included), ResMed AirFit N30i Nasal CPAP Mask Standard, ResMed AirFit N30i Nasal CPAP Mask Small |
|---|---|
| Add Heated Tubing | No, Yes – Additional $30 |
Fast Shipping and Professional Packing
Our long-standing relationship with UPS FedEx DHL and other global carriers allows us to offer an array of shipping services. Our warehouse personnel are expertly trained and will wrap your items according to our precise and precise specifications. Your goods are thoroughly checked and properly secured before shipping. Every day, we send thousands of packages to customers from all over the world. This is a testament to our commitment to be the largest online retailer globally. Both Europe and the USA have distribution and warehouse centres.
Note: Orders containing multiple items will have a different processing time for each item.
Before shipment, all ordered products will be thoroughly inspected. The majority of orders are delivered within 48 hours. Delivery time ranges between 3-7 days.
Returns
Stock is dynamic. It's not completely managed by us, as we're involved with several parties such as the factory and our storage. Therefore, the actual inventory could alter at any time. It is possible that stocks could be depleted after the order has been made.
The period of time is 30 days. If 30 days have gone in the past since you purchased, unfortunately we can't offer an exchange or refund.
In order to be eligible for a refund the item must be in good condition and in the same condition that you received it. It must also be in the original package.
Related products
Oxygen-Concentrator
3B Medical Stratus 5 Oxygen Concentrator w/Oxygen Patient Starter Kit 3B Medical
Oxygen-Concentrator
Oxygen-Concentrator
CPAP Accessory
Personal Care
Oxygen Concentrator
Personal Care
Personal Care
Oxygen-Concentrator
3B Medical Stratus 5 Oxygen Concentrator – Certified Pre-Owned 3B Medical
Oxygen-Concentrator
CPAP Tubing and Hoses
